Why Aerotech FRP Fans


  • 2 years Guarantee for all fan assemblies from installation period.
  • Power Saving guarantee of upto 30% without reduction of air flow.
  • Higher Durability of fan blades. The blades will easily last for 10 years minimum as we use top grade material, which is superior quality of resin (Epoxy) designed to with stand harshest condition for cooling tower.
  • Aerotech maintains all the fan tip clearance with the ratio of 0.03% but it is variation depend to improper round shape of the fan cylinder.
  • Our fans maintain the track variation within range of less than 25mm for large size of the fans as per recommended international standard.
  • Longer life for fan as we maintain special hard build on leading edge providing Erosion resistance.
  • All fans are built with UV protected and corrosion free material.
  • Tailor made design possible due to special moulds which helps in producing any diameter as per clients requirement.
  • Our fan assembly not only saves power it has low maintenance cost, inter changeable parts and gives less load on gear box which helps in extending life of gear box.
  • Our typical balancing method like momentum balancing of individual blades thereby maintaining equal centre-of-gravity of all fan blades and giving momentum matching mark for easy installation in hub. Hub is dynamically balanced to ensure minimum vibration (Grade of Balancing G-6.3)
  • Manually adjustable pitch, Steel galvanized hub with FRP hollow blade from 2’Ø to 50’Ø. Adjustable power setting corresponding to climatic condition.
  • Our ideal elliptic inlet type velocity recovery-cone FRP fan cylinder, resonance stable, reduces HP, and increase air moment-an ideal mate.
  • Our fans resist moisture. Dripping water and repeated condensation from a saturated atmosphere are to be regarded as abnormal hazards. Aerotech provides higher grade materials and finishes which resist corrosion. The impellers are constructed from materials selected to resist erosion, and pitting are avoid from the points of impacts with the liquid drops.
  • Resist's Corrosion. Heavily polluted industrial atmospheres will be sufficiently corrosive to shorten the life of most general- purpose fans. Aerotech provides the concentration which remains within what might be described as the “breathable” range, additional coats of protective paints will usually suffice. Chlorinated rubber paints are commonly used for this purpose. Aerotech Fans handle highly corrosive gases, particularly when wet or hot, may be require to be constructed from special corrosion-resistant of FRP raw materials.
  • Heat resistance: Aerotech fans are suitable for operating continuously in normal indoor and outdoor atmospheres at temperatures up to 40oC~120 oC.
  • Abrasion resistance: The impellers of general-purpose fans may be worn away by the passage of too much dust of an abrasive character. If the particles cannot be sufficiently removed, as by a cyclone, an abrasion resistance fan must be specified. FRP fan blades moulded to aerofoil shape used for axial fans, and will deal with particles of any hardness.

OUR CLIENTS
Aerotech Energy Pvt. Ltd. manufacturer of Air Cooled Steam Condensers, Cooling Tower, energy efficient FRP hollow axial flow fans assemblies, Single Row Air Cooled Condensers, Air Finned Coolers and Evaporative Condensers

Aerotech Energy Pvt. Ltd. introduce ourselves as one of the renowned manufacturer of Air-Cooled Steam Condensers, Cooling Tower, Energy Efficient FRP Hollow Axial Flow Fans Assemblies, Single Row Air Cooled Condensers, Air Finned Coolers and Evaporative Condensers. We regularly supply our products to various OEM companies for their turnkey projects in India and Abroad. more...

Office Address

214-215, Laxmi Industrial Estate,
Dahisar Check Naka,
Mira Road (East),
Thane - 401104,
Maharashtra,INDIA.

Mobile No: +91-98200 36729/98690 81881
E-mail: ceo@aeroteche.com / info@aeroteche.com